MCR SmartTorch Planner

SmartTorch Planner


MCR’s suggested tool string is based on limited information provided by the licensee or approved user of the SmartTorch Planner and is subject to change. The licensee shall hold MCR and its affiliates harmless from any liability and consult with MCR’s technical team for further guidance prior to each deployment.
If you are an existing licensee, please log into the MCR portal for full access to the SmartTorch Planner.

What is your Email Address:
Does your pipe need to be cut or perforated?
What are the contents of the pipe?
When operating in a gas filled pipe, it is recommended to use the 10kpsi configuration.
What is your operating pressure?
What is your operating temperature?
What is your pipe O.D. ?
What is your minimum restriction?			Inches
What would you like to search by:
What is your pipe weight? What is your wall thickness?			lbs/ftInches
What is your fluid weight?			lbs/gal
What is your solids content percentage?
What is the cut depth?
What is the fluid level?
Is there flow past the cut/perforating point?
What is you Pipe I.D. ?			Inches
What is your loss rate?			bbls/min

MCR Oil Tools, LLC | Front Desk: +817.701.5100 Sales Direct: (Office Hours) +817.704.6661 | (After Hours) +682.225.0275 24/7 Technical Support: +337.519.5081 7327 Business Place | Arlington, TX | 76001